Manufacturers Exporter & Suppliers of Diamond Marble Gangsaw, Wire Dressing Machine, Gantry Crane.
About Us :
Shree Ram Engineering Works Manufacturers & Exporter of Diamond Marble Gangsaw, Wire Dressing Machine, Mono Blade Dressing Gantry Crane, Derrick Crane & Mining Equipments.

 
Products Range :
 
# Multi Blade Gangsaw

MODEL NO.OF BLADES MAX.BLOCK SIZE BLADE OVERALL SIZE FOUNDATION
X Y Z L A B C RC P Q R G E F H I
M. I. W DS BHD - 70 70 3200 1800 1900 180 x 4200 13957 5300 5000 1550 4067 6265 3625 13440 3300 2000 8390 5050
M. I. W DS BHD - 80 80 3200 2000 2000 180 x 4200 14000 5300 5200 1650 4110 6265 3625 13500 3500 2100 8400 5100
 
Length of Blades 4100 / 4200 x 180 mm
Thickness of Slab 20 mm
Rotation speed of Shaft 105 RPM
Stroke Length 600 mm
Tensioning of Blades 11 - 15 tonnes / blade
Tensioning Device Mechanical
Water Consumption 10 litres./ blade
Lubrication System SELF
Main Blade rack motion To & Fro Sliding Motion
Cut down feed speed 50 to 700 mm / hr
Main motor power 110 / 150 kW/hr
Cut Down Feed motor power 2.2 / 3 kW /HP
Fast Lowering motor power 7.5 / 10 KW /HP
Trolley Transmission Speed 4 meters. / minute
Total Installed Power 132/180 kW/ HP
# Mono Dressing Machine
# Polishing Machine
 
# Gantry Crane
Capacity Span of Beam Cantilever Overhang Lifting Height Operational Speeds Motor Power Total Installed Power
Worm / Helical Gear Reduction
Long Travel Cross Travel Lift Long Travel Cross Travel Lift
10 mt 10-30 mtrs 3-6 mtrs 5.5-7 mtrs 3-5 mtrs/min 3-5 mtrs/min 2.5/2.75 mtrs/ min 1.5 hp x 2 1.5 hp x 2 10 hp 14.5 hp
15 mt 10-30 mtrs 3-6 mtrs 5.5-7 mtrs 3-5 mtrs/min 3-5 mtrs/min 2.5/2.75 mtrs/ min 2 hp x 2 2 hp 15 hp 21.0 hp
20 mt 10-30 mtrs 3-6 mtrs 5.5-7 mtrs 3-5 mtrs/min 3-5 mtrs/min 2.5/2.75 mtrs/ min 2 hp x 2 2 hp 20 hp 26.0 hp
30 mt 10-30 mtrs 3-6 mtrs 5.5-7 mtrs 3-5 mtrs/min 3-5 mtrs/min 2.5/2.75 mtrs/ min 2 hp x 2 2 hp 25 hp 31.0 hp
40 mt 10-30 mtrs 3-6 mtrs 5.5-7 mtrs 3-5 mtrs/min 3-5 mtrs/min 2.5/2.75 mtrs/ min 2 hp x 2 2 hp 30 hp 36.0 hp
------------------------------------------------------------------------------------------------------------------------->
# Wire Dressing Machine
Alternate is a single wire machine for block squaring and slabs cutting. The machine is sutable to cut marble. Granite and kind of stone. Alternate is stand on structure placed, machine trolley moves on a rail tracks with one motor controlled electrcally through the control panel. Alternate can be equipped with a speed variation of the diamond wore from 0 to 33m/sec.
The Structure of the machine is made by two steel coloumn connected by a steel beam. On each coloumn slide two aluminum fly wheels diam 800mm. The ascent and ascent and descent movement of the fly wheels is controlled by a manual system. The Diamond wire tension system is works on driven by one side two fly wheel and it's controlled all through the cutting phases. The 15 HP main motor is equipped with a water distributor plan to cool the diamond wire and clean the cut. Inches of water shortage will stop the machine immediately to avoid any damage to the diamond wire. The control panel and all the electric device are placed on board of the machine.
Technical Data
Machine Height 4400 mm
Machine Width 5352 mm
Max Length of the Block 3500 mm
Max Height of the Block 2100 mm
Translation of the Trolley of Rails 6096 mm
Useful Machine Cutting Height 2300 mm
Recover Wire 200 mm
Diamond Wire 15 meter
Main Electric Motor 15 Kw / 20 hp
Electroc Motor 0.75 Kw / 3 hp
Up/Down Movement 2.2 Kw / 3 hp
Water Pump 0. 75 Kw / 1hp
Diamond Wire Speed 0-30 M/Sec.
Total Power Installed 18.75 Kw / 25 hp
 
# Multi Wiresaw
# Wiresaw Machine
   
# Marble Block Cutter Machine
 
# Derrick Crane
 
 
     
 
SHREE RAM ENGINEERING WORKS
Address : Near Mela Ground, Kelwa Road, Amet - 313 332 ,
Dist : Rajsamand (Rajasthan) India
Tel : +91-2908-230564 (F/O)
Contact : Mr. P. D. Sharma Mob : (91-99297-11601)
Mr. Hemendra Sharma Mob : (91-99287-11076)
E-mail :shreeramengineeringworks@gmail.com