Manufacturers & Suppliers of Ram Type Vertical Milling Machine...
About Us :

Manufacturer, Exporter and Suppliers of 100% genuine and gauranteed All Type of Special Purpose Machine.

  • Ram Type Vertical Milling Machine.
  • Drilling Cum Milling Machine.
  • 3D, 2D Panto Graph en Graving
    Machine.
  • Surface Grinder.
 
Universal Letter Engraving and Copy Milling Machine

Universal Letter Engraving and Copy Milling Machine
(Speed Cut-M99)

  • Make Highly Skilled Profile MIlling, Work of Fine Engraving & Routing Simple.
  • Tough Reliable Accurate & Ideal for High Precision Components.
  • Perfaction in Engraving.
  • Permits the Reproduction of two Dimensional Design.
  • Pantograph for Reducing & Enlarging Work in two Dimensions.
  • Simple Yet Versatile and Very Fast.

 

Introduction
Speed Cit-M99 Universal Letter Engraving Machine is Built arounda Pantograph mechanism which permits the reproduction of two dimensional designs. In this machine a trachingstyles which is guided along a template or master controls a single-lip cutter, which serves to reproduce themaster on a reduce or a 1-to1 Scale. In the Precision Mechnical Industries as well as in numberous other industries, This Model has proved its usefullness, economy and matchless versatily inthe field of letter Engraving and other light milling works on Precision Mechanical parts. They are equally suitable for job work and batch and mass production. The fact that Speed Cut Engraving Machine is the preferred choice in many industrial fields both at homeand abroad testifies to the quality of its work and two its wide range of usefullness.
it is also possible to have Engraving machine operated, after a relatively short instruction period, by female personnel, Maximum economy in this case being ensured by time studies, by breaking jobs down into separate operation and by the use of properly designed jigs and fixtures.
In shops Specializing in Engraving work, the Speed Cut Engraving Machine have proved indispensable tools for the production of lettering, templates for letter engraving work, stamps, punches and the like. This Engraving and lettering work on plane, crowned or circular work pieces such as are encountered in the production of jewellry, Watches, toys, medals and control panels etc.
This Model ha a still wider field of applications due to the grader area convered by its pantograph, it can be used for Engraving, Lettering and milling work on large size plates, sings and similar bulky work-pieces.
Construction
This machine is designed for letter and line engraving and light milling works as encountered in various industries and trades. In many field replication work can be easily carried out by female help. The light weight design of the Pantograph with play-free ball bearing joints for accurate work and easy tracing within the two dimensional working range. The pantograph ratio can be set between 1 : 1 and the smallest 1:50. The high speed Cutter Spindle running is adjustable ball bearing.
Technical Deta Copy Holder Table
Drive Motor 0.5 H.P. 2800 R.P.M. Cord drive. Copy holder table clamping area (450x250 MM)
Max. Height between copy holder and pantograph arm (20 MM)
Spindle : Weight : 350 KI.g. approximately.
Spindle speed range 1800 to 15000 R.P.M.
Spindle fine adjustment (3MM)
Spindle coarse adjustment (6.25 MM)
Spindle Collet tapper 10°		 Standard Equipment
Set of spanners, one spring coolets, four clamps for copy holder table, two clamps for work table, one tracher pin.
Pantograph  
Panograph arm largest 1:1, Smallest 1 : 50 Special Equipment at extra cost
Work of Table 1. Tool Grinding attachment
Longitudinal Travel (300 MM)
Main slide cross travel (150 MM)
Work Table Clamping area (300x150 MM)
Work Table up and down (250 MM) 		2. Swivel Vice
3. Fixed Vice
4. Rotary Table
5. Copy set A to Z and 0 to 9
6. Electric etching attachment
7. Roll engraving attachment
   
Versatile Turret Ram Milling Machine VTR-1

Versatile Turret Ram Milling Machine VTR-1
With Ac Drive

  • The Single Machine Can Perform Milling, Drilling and Boring Operations with Precision and Speed.
  • Can be Operated Verticallyat any Angle at any Point on the Table Surface Easily.
  • The Machine Can be Converted to a Horizontal Milling Milling Machine with Use of Right Angle Attachment.
  • Heavy Milling with Geared Reduction can Utilise the full Overload Capacity of the Motor.
  • Available with a Range of Accessories.
Table
Length x Width
Width of Slots
No. of Slots
Center Distance
Max. Weight admitted on table 		..
1080 x 240 mm
16 mm
3
65 mm
250 Kg.
Travers (Manual)
Logitudinal
Cross
Vertical
Ram		 ..
650 mm
300 mm
400 mm
300 mm

Milling Head
Spindle bore (without face mounting facility)
Quill Travers
no. of power quill feeds
Feed rates
Draw bolt
Motor power
Swivel Milling Head

Ram
No. of speed

..
H30 (ISO 30 on request)
127 mm)
3
mm Rev 0. 05, 0.08, 0.15
12 x 1.5 mm
1.5 K.W.
45° either side
45° towards coloum
45° away from coloum
360°
6
Speed Range With Motor 1440 RPM 70, 118, 198, 306, 560, 947, 1520, 2455
Space Required
Length x Width x Height including all possible movements 		2300 x 1700 x 2200 mm.
Shipping Dimensions
Length x Width x Height
Weight (Net/Gross (Approx.) 		1750 x 1700 x 2000 mm.
1150/1155 Kg.
Standard Equipment Electric Complete with wiring suitable for Standard 4 14 V. 50 Cycles, 3 phase-AC supply-draw bolt-set of
service tools.
   
Precision Drilling-Cum Milling Machine With Tool Cabinet
Technical Specification
S. No
Description
 Specification
1. Drilling Capacity in Steel 20 mm
2. Spindle Taper MT-2 OR R-8
3. Spindle Travel 85 mm
4. Spindle Speeds 350 to 200 RPM (4 steps)
5. Pillar Dia 92 mm
6. Spindle to Coloumn Distance 175 mm
7. Vertical Lift Coloumn 225 mm
8. Max. HT between Table & Spindle
Nose		 450 mm
9. V-belt Selection A-type
10. Motor 1 k.w 440 V 50 HZ.
11. Weight Approx. 220 Kgs.
12. Colour Oasis Green 03-9353
     
 
Co-Ordinate Table
 
1. Length x Width 500 x 200 mm
2. Longitudinal Travel 350 mm
3. Cross Travel 160 mm
4. No. of Slots 3
5. Width of Slots 12 mm
6. Weight Approx. 100 Kgs.
Please Note : Modern Machine Reserves
the right to Change the Specification from time to time with out prior Notic.
......
Address & Contact Person :

Modern Machine Tools Industries
308- Industrial Area, Phase-2,
Chandigarh - 160002
India.

Tel : 91-172-4616358,(F)
E-mail : modern308@gmail.com

Mr. Avtar Singh
(Mobile : 94171-32538)


©Modern Machine Tools Industries : Powered by , www.indiainternationalyellowpages.com